Best Printable Vinyl & UV Films for Mimaki UJV100-160 (2026 Buyer's Guide)
Printable Vinyl & UV Films Compatible with Mimaki UJV100-160
The Mimaki UJV100-160 is a 64-inch UV LED printer used by US sign shops, packaging mockup studios and short-run label producers. Unlike eco-solvent machines, the UJV100-160 cures ink instantly under UV LED — no off-gassing, no heaters, immediate post-print finishing. This page covers the Graphictac films our team has tested on the UJV100-160 with recommended profiles.
Request our Free Pro Sample Pack — 12 trimmed swatches shipped from our Cypress, CA warehouse, configured for UV LED inks.
Why UJV100-160 owners ask about media compatibility
The UJV100-160 uses Mimaki LUS-200 / LUS-150 UV inkset. Two practical considerations for media:
- UV cures on the surface. Films with non-porous topcoats (chrome, holographic, banner) work beautifully because there's no ink absorption requirement. Conversely, semi-porous coatings designed for eco-solvent may show ink "sit-on-top" gloss differences.
- Adhesion via UV cure depth. Use Mimaki's "primer" or "boost" mode for chrome and holographic films to ensure deep cure into the topcoat.
Recommended Graphictac Films for the Mimaki UJV100-160
1. 6mil Semi-Rigid Printable Permanent Matte White Vinyl
- Suggested ink density: 240–260% (10–15% lower than eco-solvent)
- UV mode: standard cure
- Pass: 8-pass for solid colors
2. Optically Clear Removable Printable Commercial Grade
- Suggested ink density: 220–240%
- UV mode: standard; use white underbase if printing on dark final substrate
3. Mirror Chrome Printable Vinyl (Gold / Silver)
- Suggested ink density: 200–220%
- UV mode: boost for adhesion to chrome topcoat
- UV LED advantage: no heater means no chrome layer distortion
4. 4mil Rainbow Holographic Stretchable Printable Vinyl
- Suggested ink density: 210–230%
- UV mode: boost
5. Graphictac 10mil Anti-Curl Roll-Up Banner Media
- Suggested ink density: 240–260%
- UV mode: standard
Profile and RIP Notes
Start with stock Mimaki LUS-200 profile in RasterLink. Reduce total ink limit by 10–15% versus eco-solvent. UJV100-specific ICC profiles available free for verified wholesale accounts — specify "UJV100 LUS-200" when requesting.
Lamination & Finishing
| Application | Recommended Laminate | Why |
|---|---|---|
| Vehicle decals | 3mil cast gloss | UV protection, conformability |
| Window graphics (interior) | 1.5mil clear gloss | Optional |
| Window graphics (outdoor 12+ months) | 3mil clear gloss with UV inhibitor | Prevents ink fade |
| Chrome / holographic decals | 2mil matte (UV cuts cleaner without pre-laminate) | Print-only finish flexibility |
FAQ
Q: Does UV cure damage chrome or holographic films?
A: No. UV cure happens at the LED head — the substrate sees no heat. UV is gentler than eco-solvent on metallic films.
Q: Can I run the same Graphictac films on a UJV100-160 that I run on a CJV300 Plus?
A: Yes, just reduce ink density 10–15% on UV vs eco-solvent.
Q: Lead time on a sample pack?
A: 2 business days from Cypress, CA via USPS Priority.
Q: Wholesale minimum?
A: Tier 1 at 10 rolls/month, Tier 2 at 30+ rolls/month.
Q: ICC profiles for UV?
A: Yes, distinct from eco-solvent. Specify "UJV100 LUS-200" when requesting.
Next Step: Test Before You Commit
Request a free sample pack sized for UJV100-160 print testing.
Request Your Free Pro Sample Pack →
Or call: (949) 988-0077 — Mon–Fri, 9am–5pm Pacific.
Graphictac USA · 5550 Cerritos Ave, Cypress, CA 90630