Best Printable Vinyl & Banner Films for Mimaki JV300 Plus (2026 Buyer's Guide)
Printable Vinyl & Banner Films Compatible with Mimaki JV300 Plus
The Mimaki JV300 Plus is the print-only sibling of the CJV300 Plus — same SS21 (or BS3) eco-solvent inkset, same 54-inch and 64-inch print widths, but no integrated contour cut. JV300 Plus owners typically pair it with a separate plotter or a finishing partner. This page covers the Graphictac films our team has tested on the JV300 Plus plus the recommended profiles and ink density values.
Request our Free Pro Sample Pack — 12 trimmed swatches shipped from our Cypress, CA warehouse, configured for SS21 eco-solvent inks.
JV300 Plus vs CJV300 Plus: media compatibility
Same inkset, same print engine, same media handling. The only practical difference is that JV300 Plus owners don't worry about cut-sensor reliability on chrome and holographic films — print and laminate, then send to a plotter (or a finishing partner) for cutting. This actually expands the usable film selection: chrome and holographic films work great on the JV300 Plus without the matte-laminate-before-cut requirement.
Recommended Graphictac Films for the Mimaki JV300 Plus
1. 6mil Semi-Rigid Printable Permanent Matte White Vinyl (20in / 30in / 54in)
- Suggested ink density: 290–310%
- Print heater: 40 °C
- Pass: 8-pass High Quality for solid colors; 6-pass Standard for outdoor
- Lamination: 3mil overlaminate for >12 month outdoor
2. Optically Clear Removable Printable Commercial Grade (54in x 150ft)
- Suggested ink density: 250–270%
- Print heater: 38 °C
3. Mirror Chrome Printable Vinyl (Gold Bubble-Free 30in / Silver Air-Release 54in)
- Suggested ink density: 230–250%
- Print heater: 35 °C
- JV300 Plus advantage: no cut-sensor laminate requirement — chrome films print direct without pre-laminate
4. 4mil Rainbow Holographic Stretchable Printable Vinyl (30in x 100ft)
- Suggested ink density: 240–260%
- Print heater: 38 °C
5. Graphictac 10mil Anti-Curl Roll-Up Banner Media (36in x 100ft)
- Suggested ink density: 270–290%
- Print heater: 42 °C
6. 13mil Block-Out Double-Sided Banner Media (54in x 100ft)
Specific to JV300 Plus and other print-only banner workflows — double-sided block-out for double-faced retractable banners and hanging signs.
- Suggested ink density: 280–300%
- Print heater: 45 °C
- Print both sides; align via Mimaki RasterLink registration marks
Profile and RIP Notes
The JV300 Plus runs Mimaki RasterLink. We recommend:
- Start with stock Mimaki SS21 profile
- Adjust ink limit per the values above
- For shops >30 sqm/day, request our JV300-specific ICC profiles — free for verified wholesale accounts
Lamination & Finishing
| Application | Recommended Laminate | Why |
|---|---|---|
| Vehicle decals, fleet graphics | 3mil cast gloss overlaminate | UV protection, conformability |
| Window graphics (interior) | 1.5mil clear gloss | Anti-scratch, optional |
| Window graphics (exterior, 12+ months) | 3mil clear gloss with UV inhibitor | Prevents ink fade |
| Banner / retractable | None or 3mil gloss for premium | Anti-scratch in transport |
| Chrome and holographic decals | 2mil matte for indoor; 3mil gloss outdoor | Print-only workflow allows free choice |
Roll Width Compatibility
The JV300 Plus accepts media up to 64 inches wide depending on configuration. Common widths: 30in, 36in, 54in. Banner stocks ship 36in or 54in.
FAQ
Q: I have a JV300 Plus paired with a separate plotter. Do you have any cut data I can use?
A: Yes — we can supply common contour cut paths (DXF, AI) for our standard SKUs. Specify your plotter when requesting.
Q: Will Graphictac films void my Mimaki JV300 Plus warranty?
A: No. Mimaki warranty covers hardware and SS21 ink, not third-party media.
Q: How does Graphictac compare to 3M IJ180 / Avery MPI 1105 on the JV300 Plus?
A: Comparable performance. Our films are typically priced 25–40% below at wholesale tier 1.
Q: Do you stock 13mil double-sided block-out banner media for the JV300 Plus?
A: Yes — specifically formatted for print-only workflows. Listed in the recommended films above.
Q: What's the lead time on a sample pack?
A: 2 business days from order to delivery via USPS Priority. Ships from Cypress, CA.
Q: Minimum order quantity for wholesale?
A: Tier 1 starts at 10 rolls per month. Tier 2 at 30+ rolls per month.
Next Step: Test Before You Commit
Request a free sample pack sized for JV300 Plus print testing.
Request Your Free Pro Sample Pack →
Or call: (949) 988-0077 — Mon–Fri, 9am–5pm Pacific.
Graphictac USA · 5550 Cerritos Ave, Cypress, CA 90630